OIL & GREASE STAIN REMOVAL FROM CONCRETE, CEMENT OR ASPHALT
Driveway oil stains are more than just a nuisance. They lower the value of your property, present a health hazard to children and pets and provide a source of stains to be tracked into your house or car interior. Until now, even with hard work, it was never possible to completely remove a stain left by an oil leak that penetrated deep into concrete, cement or blacktop driveways. Now with 21st century chemistry WINSOL Laboratories has the solution.
WINSOL G-FORCE offers an inexpensive, easy to use and safe method to remove driveway or garage floor stains. New stains or old stains are treated the same and quickly eliminated. Our exclusive formulation of bacterial ingesters will penetrate deep into concrete, cement or asphalt surfaces and breakdown, digest and remove oil, grease or sludge stains no matter how old. No strong chemicals or cleaners are needed. Science does the work so you don't have to.
If the oil in your driveway looks as bad as this or even if it's just a few small spots from your vehicle, or a friend or neighbors car then WINSOL can be your new best friend. Don't spend a small fortune on resurfacing or painting your concrete driveway or garage floor when a safe, effective, do it yourself stain removal is yours for the asking. If you're like our other customers you will soon be the envy of the neighborhood and the one your neighbors and friends come to for advice when they are faced with oil or grease stains in their own driveways, sidewalks, parking lots or what have you. If you want to see G-FORCE in action just take a look at the spectacular photos below of old, deep-seated oil stains removed with ease from a concrete public street.
One year old oil stains in concrete Application of G-FORCE to spot on the left
Results of 1 G-FORCE Treatment Results of 2nd G-Force treatment - stain eliminated
TYPE Blend of bacillus spores
WEIGHT PER GALLON 8.3 lb.
FREEZING POINT <38°F.
FLASH POINT Non flammable
SOLUBILITY IN WATER Complete
SPORE COUNT 200 billion/gallon
FOR USE WITH ALL TYPES OF PETROLEUM OR VEGETABLE OILS
WILL NOT DAMAGE ANY MATERIAL OR SURFACE THAT CAN ACCEPT WATER
NOT FOR SYNTHETIC OILS, POWER
AUTOMATIC TRANSMISSION OR HYDRAULIC FLUIDS
|Case (4 x 1 gallons) 165.80
|Pail (5 gallon) 197.25
To see more WINSOL Products, ask for
or download the MSDS for G-Force use these links
Hard Surface Cleaning, Concrete, Cement and Asphalt:
Pour on water dampened surface mixed 1:1, let dwell till
Porous Surface Cleaning, Soils: Scrape surface, dampen and apply, let dwell till dry.
Equipment Cleaning: Dilute 3:1 to 5:1 and spray. Rinse.
Pressure Washing: Blast heavy materials, spray on at 50-50 ratio and let dwell. Pressure wash again from bottom up.
Product effective temperature range 50° to 105º F.
Normal coverage approx. 100 - 200 sq. ft. per gallon
PACKAGING AVAILABLE AND SHIPPING WEIGHTS:
1 gallon 10 lb.
4 gallon cases 35 lb.
55 gallon drum 500 lb.
Approximately one year in tightly covered container.